SMSL SAP-10 Full Balance Headphone Amplifier Linear Power Supply High Power Head – hifiexpress1

SMSL SAP-10 HI-FI Headphone Amplifier Full Balanced Output XLR and RCA SMSL SAP-10 HI-FI Headphone Amplifier Full Balanced Output XLR and RCA

In stock

S.M.S.L VMV

$191.99
Ships From
Color
220V
110V
-
+
$191.99

SMSL SAP-10 Full Balance Headphone Amplifier Linear Power Supply High Power Head

  • This unit support both balanced input and output.
  • RCA analog output also supported.
  • Featured with XLR balanced output.
  • Supported 6.35mm headphone jack output.

Description

Balanced desktop headphone Amp

Affordable,easy to use,and remarkably effective

Offering a better listening experience

 

Offering powerful output from two pieces of high performance TPA6210A2 amp chip imported from Texas Instruments

This unit support both balanced input and output

RCA analog output also supported

Featured with XLR balanced output

Supported 6.35mm headphone jack output

It designed inteligently with No popping sound that protect headphone from damage

Independent balanced circuit

Using high performance electronic volume control IC which ensure balanced output on right and left channel

 

Notes: It takes 2 to 3 seconds to power on.Blue LED active when unbalanced input,Purple LED on when balanced input.Red LED on when powered off

 

Specifications

Input:RCA/XLR

THD+N:0.002%

SNR:104dB

Headphone amplifier output power (@THD=0.1%)

Balanced  32ohms  660mW;300ohms 170mW

Unbalanced   32ohms  275mW;300ohms 48mW

 

Package size:L285*W256*H80(MM)

Machine size:L205*W155*H47(MM)

Net weight:1444g

Gross weight:1867g

 

Internal illustration

Built-in high performance and low-vibration TRAID transformer from USD to power the amp sufficiently

Four pieces of 300uF nichicon FW series audiophile capacitors used in power filter circuit

Signal coupling aspect,SAP-10 uses 10 pieces of epcos audiophile standard film capacitor.

It uses audiophile four channel ultra-low distortion NJW1195 volume control chip which ensure balanced output of right and left channel and abosolutely balanced phase

Using two pieces of advanced TPA6120A2 headphone amp chip which ensure to offer big power and low distortion.

All the jacks are gold-plated,durable and reliable

Panasonic relays used to protect headphone demage from popping sound and reduce lossless of audio signal

 

Warning

Balanced output and unbalanced output can not use at the same time

Hearing experts advise against continuous,loud and extended play.If you experience a ringing in your ears,reduce volume or discontinue use

Input Type: RCA,XLR
PCM: No
Package: YES
DAC Model: TPA6210A2
Built-in Battery: No
Channels: 2 (2.0)
Type: Home Amplifier
Output Type: Balanced Out
Model Number: SAP-10
DSD (Direct Stream Digital): No
Bluetooth: No
Body Material: Aluminum
Output Power: THD + N = 0.1%
Brand Name: S.M.S.L
Signal To Noise Ratio: 104
Dimensions (WxHxD): 205*155*47 mm
WIFI: No
Recommended Headphone Maximum Impedance: 251-300 Ohm
BALANCED AMPLIFIER: HEADPHONE AMPLIFIER
AMPLIFIER: XLR INPUT
RCA INPUT: BALANCED OUTPUT
HIFI AMPLIFIER: HI-FI
POWER AMPLIFIER: OHM AMPLIFIER
AMPLIFIER AUDIO: AUDIO AMPLIFIER
AMPLIFIER HEADPHONE: AMPLIFIER DAC
DAC AMPLIFIER: HIFI POWER AMPLIFIER
AUDIO DAC: ampli casque hifi
digial audio: digital amplifier

SMSL SAP-10 Full Balance Headphone Amplifier Linear Power Supply High Power Head

  • This unit support both balanced input and output.
  • RCA analog output also supported.
  • Featured with XLR balanced output.
  • Supported 6.35mm headphone jack output.

Description

Balanced desktop headphone Amp

Affordable,easy to use,and remarkably effective

Offering a better listening experience

 

Offering powerful output from two pieces of high performance TPA6210A2 amp chip imported from Texas Instruments

This unit support both balanced input and output

RCA analog output also supported

Featured with XLR balanced output

Supported 6.35mm headphone jack output

It designed inteligently with No popping sound that protect headphone from damage

Independent balanced circuit

Using high performance electronic volume control IC which ensure balanced output on right and left channel

 

Notes: It takes 2 to 3 seconds to power on.Blue LED active when unbalanced input,Purple LED on when balanced input.Red LED on when powered off

 

Specifications

Input:RCA/XLR

THD+N:0.002%

SNR:104dB

Headphone amplifier output power (@THD=0.1%)

Balanced  32ohms  660mW;300ohms 170mW

Unbalanced   32ohms  275mW;300ohms 48mW

 

Package size:L285*W256*H80(MM)

Machine size:L205*W155*H47(MM)

Net weight:1444g

Gross weight:1867g

 

Internal illustration

Built-in high performance and low-vibration TRAID transformer from USD to power the amp sufficiently

Four pieces of 300uF nichicon FW series audiophile capacitors used in power filter circuit

Signal coupling aspect,SAP-10 uses 10 pieces of epcos audiophile standard film capacitor.

It uses audiophile four channel ultra-low distortion NJW1195 volume control chip which ensure balanced output of right and left channel and abosolutely balanced phase

Using two pieces of advanced TPA6120A2 headphone amp chip which ensure to offer big power and low distortion.

All the jacks are gold-plated,durable and reliable

Panasonic relays used to protect headphone demage from popping sound and reduce lossless of audio signal

 

Warning

Balanced output and unbalanced output can not use at the same time

Hearing experts advise against continuous,loud and extended play.If you experience a ringing in your ears,reduce volume or discontinue use

Input Type: RCA,XLR
PCM: No
Package: YES
DAC Model: TPA6210A2
Built-in Battery: No
Channels: 2 (2.0)
Type: Home Amplifier
Output Type: Balanced Out
Model Number: SAP-10
DSD (Direct Stream Digital): No
Bluetooth: No
Body Material: Aluminum
Output Power: THD + N = 0.1%
Brand Name: S.M.S.L
Signal To Noise Ratio: 104
Dimensions (WxHxD): 205*155*47 mm
WIFI: No
Recommended Headphone Maximum Impedance: 251-300 Ohm
BALANCED AMPLIFIER: HEADPHONE AMPLIFIER
AMPLIFIER: XLR INPUT
RCA INPUT: BALANCED OUTPUT
HIFI AMPLIFIER: HI-FI
POWER AMPLIFIER: OHM AMPLIFIER
AMPLIFIER AUDIO: AUDIO AMPLIFIER
AMPLIFIER HEADPHONE: AMPLIFIER DAC
DAC AMPLIFIER: HIFI POWER AMPLIFIER
AUDIO DAC: ampli casque hifi
digial audio: digital amplifier

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Recently Viewed Products Recently Viewed Products